Coming from a world of Ender 3 machines, I’m use to using wheel locks, ABL and mesh leveling where once I dial it in, I don’t touch it again until something goes wrong. With the ECC I thought the same would apply but the few prints I did where I didn’t do the auto level first, the nozzle was too close and scrapped along the bed. Wondering if people have had a similar experience? I was only using the textured side of the bed and didn’t make any changes in the slicer. Side not, if you want to use the other side (B-smooth) you have to change the elegoo slicer setting to bed type, cool smooth plate. Took me way to long to figure that out.
so the a1 the leveling was one and done? I kind of figured that’s how it should be on the ECC as well but after that grind I was nervous to try again. now that I have more beds and a spare nozzle maybe I’ll give it a go without the leveling and see what happens