I mean, my SUV is a 2004 and seems to be holding up pretty well. I give it full synthetic oil and take it off-road occasionally, so it gets a wide range of treatment. Maybe I’m just not as bothered as other people are by the occasional bit of maintenance. I just replaced the thermostat this Fall, which was certainly a lot harder than on the old car because this one is buried down along the side of the engine, but it was still a pretty simple job.

It was a '74 Pontiac LeMansthat I bought in 1987. And sorry, I did forget about one thing… I had to replace the transmission a couple times, but back then you could get them from a junkyard for cheap, and it only took a couple hours to replace. Probably would have lasted a lot longer if I’d taken the time to rebuild the clutches though. Of course it’s not like you can drive any vehicle forever, there was the maintenance as things like bushings and alternators wore out. For this discussion though I don’t count things that you have to do on any vehicle with 300k miles on it. Everything wears out eventually, and yeah even the motor was starting to smoke by that time.

That’s what rich people are for – to suffer for the benefit of the working class.

Never buy new. Let someone else deal with the frequent hassle of getting all the problems fixed “under warranty” while the lemons get sent to salvage. Give me the vehicles that survive. Case in point, I bought my first car for $500, drove it for 24 years, and the biggest age-related expense was rebuilding the front end for $600. I sold the car in 2011 for $1000. I bought my current SUV in 2009 and the biggest mechanical failures have been replacing the power steering pump and the 4WD short axles.

I had a friend who insisted he needed to spend all his money buying new cars. He tried to tell me how much money he was saving because the dealership was fixing all the problems for free. I pointed out that he had barely even driven his new car because it was spending more time at the dealership every week or two and he was constantly wasting his own time taking it back for yet another problem.

How to live forever. Oh wait…

If they weren’t on X and were reading reality-based information, they would already know the entire world hates Trump’s politics, and I certainly don’t blame anyone for hating the entire US in general. Too many people here will gladly hate an entire country even when they had no say in choosing their leaders, so it’s only fitting to see that attitude thrown back at us.

On the other hand, the exposure that all these Trump-supporting “influencers” are foreign bot accounts is hilarious, and I love that MAGA is finally being shown exactly who they’ve been listening to.

Your server needs to have a static IP address. Once you have that, and have your DNS service set up, then you should be able to update your domain(s) to point to the new DNS. This new server doesn’t have to be your primary DNS entry for the domain(s), but it should be one of the first two entries. And that’s pretty much all you need to get started.

One other consideration is setting up the master/slave status of your DNS servers so you only have to make updates in one spot (helpful to ensure everything stays in sync). This isn’t a requirement, it just makes your life easier.

Ah ok, that makes sense they can sue later. Thanks!

I’m just wondering why the fine is only $10k? Something like this where you blow someone away for no reason, you should be forfeiting all of your possessions to their surviving family since the victim will no longer be earning an income to support them.

And yet here in Colorado we’ve been in the 70’s all week. It would be nice to get some of that moisture, we haven’t had any rain in two months.

Got a few minutes of 503504 gateway timeout errors here, but the pages just loaded back up again.

Nope, programming is like a black hole – once you’ve entered the event horizon it’s too late and you’ll never escape.

What do you mean by “traditional cad designers” and why is that important? I’m not really sure why that is something that should matter to me?

Aww man, I knew it was only a matter of time before someone was going to “force” me to learn python. Thanks for the link, I’ll take a look at this after dinner.

Another consideration… If you are a programmer type then OpenSCAD is a language-based program. I’ve been using it heavily for the past week designing a dual-filament extruder for my Ender 3, and last year I designed and built a utility trailer. As with anything it has its quirks, but I’m much more comfortable writing code and I always found the other GUI-oriented programs to be unintuitive.

We should start posting that 3.2% of children watching Trump on TV have developed autism, therefor Trump is using subliminal messaging and is dangerous to their kids. They may not care that a pedophile is in office, but mention subliminal messaging and they’ll go crazy.

I think my suggestion would be to use the PC as a dedicated firewall, but you will need at least two ethernet ports for that (one to connect to the ISP router, and the second for internal network). This lets you learn network security and control the traffic that can actually get to your other computers. You could also set up KVM to start running virtual machines here. The idea with a VM is to keep services separate and isolated, so like one VM to manage security cameras, another VM to host a game server, another one to host sonarr/radarr/jellyfin… etc.

When you are able to expand, your second physical machine should be your NAS. Get your storage space started, share it over NFS or samba, and move your backup/security camera/sonarr VMs over to this machine for direct access to the larger storage space. Pay attention to system usage and move your VMs to balance the cpu/memory resources. Eventually you may want to get a third machine dedicated more for hosting the game servers, maybe a web server to view the security camera feeds, or whatever.

You mentioned backing up Wikipedia… Have a look at the Kiwix project, you can already get access to regular backups for a lot of information sites.

Heh I managed to jump directly from best-case to worst-case, but hey, that still leaves everything in between as options. :-)

Yeah, speed is everything and there are pcmcia ethernet cards for $10 or less on ebay if OP has that option.

OK something that old surely has a serial port on it? If so, look in to “sneakernet” (it’s a technique, not a product) to connect to another computer. I’ve even done networking over a serial port with linux, but there also used to be software just for copying files. That wouldn’t give you a drive image but it would at least back up the software.

Plug the destination drive into the new USB adapter you got?